6302 Bearing
Bore (d) 15 mm
Outside diameter (D) 42 mm
Width (B) 13 mm
Inches (bore × OD × width) 0.5906 × 1.6535 × 0.5118″
Deep-groove ball bearing, medium (6300) series. Seal/shield suffixes (ZZ, 2RS, …) change the closures, never these dimensions — a 6302-ZZ and 6302-2RS are the same size.
What the number means
- 6 — deep-groove ball bearing
- 3 — dimension series (medium (6300))
- 02 — bore code (02 → 15 mm)
Neighboring sizes (medium (6300) series)
| Designation | Bore | OD | Width |
|---|---|---|---|
| 6300 | 10 mm | 35 mm | 11 mm |
| 6301 | 12 mm | 37 mm | 12 mm |
| 6302 | 15 mm | 42 mm | 13 mm |
| 6303 | 17 mm | 47 mm | 14 mm |
| 6304 | 20 mm | 52 mm | 15 mm |
Same bore, other series
Fits the same 15 mm shaft with a different OD/width envelope and load capacity.
- 6802 — 15 × 24 × 5 mm (thin section (6800))
- 6902 — 15 × 28 × 7 mm (thin section (6900))
- 6002 — 15 × 32 × 9 mm (extra light (6000))
- 6202 — 15 × 35 × 11 mm (light (6200))
Common suffixes on a 6302
| Suffix | Meaning |
|---|---|
| ZZ / 2Z | steel shields both sides (metal, non-contact) |
| Z | steel shield, one side |
| 2RS | contact rubber seals both sides (SKF 2RS1, NSK DDU, NTN LLU) |
| RS | contact rubber seal, one side |
| 2RZ | low-friction non-contact seals both sides (NSK VV, NTN LLB) |
| C3 | radial internal clearance greater than Normal (common in motors) |
| C2 | radial internal clearance smaller than Normal |
| NR | snap ring groove in the outer ring, with snap ring |
| P6 / P5 / P4 | ISO precision classes (≈ ABEC 3 / 5 / 7) |