6007 Bearing
Bore (d) 35 mm
Outside diameter (D) 62 mm
Width (B) 14 mm
Inches (bore × OD × width) 1.3780 × 2.4409 × 0.5512″
Deep-groove ball bearing, extra light (6000) series. Seal/shield suffixes (ZZ, 2RS, …) change the closures, never these dimensions — a 6007-ZZ and 6007-2RS are the same size.
What the number means
- 6 — deep-groove ball bearing
- 0 — dimension series (extra light (6000))
- 07 — bore code × 5 = 35 mm
Neighboring sizes (extra light (6000) series)
| Designation | Bore | OD | Width |
|---|---|---|---|
| 6005 | 25 mm | 47 mm | 12 mm |
| 6006 | 30 mm | 55 mm | 13 mm |
| 6007 | 35 mm | 62 mm | 14 mm |
| 6008 | 40 mm | 68 mm | 15 mm |
| 6009 | 45 mm | 75 mm | 16 mm |
Same bore, other series
Fits the same 35 mm shaft with a different OD/width envelope and load capacity.
- 6807 — 35 × 47 × 7 mm (thin section (6800))
- 6907 — 35 × 55 × 10 mm (thin section (6900))
- 6207 — 35 × 72 × 17 mm (light (6200))
- 6307 — 35 × 80 × 21 mm (medium (6300))
Common suffixes on a 6007
| Suffix | Meaning |
|---|---|
| ZZ / 2Z | steel shields both sides (metal, non-contact) |
| Z | steel shield, one side |
| 2RS | contact rubber seals both sides (SKF 2RS1, NSK DDU, NTN LLU) |
| RS | contact rubber seal, one side |
| 2RZ | low-friction non-contact seals both sides (NSK VV, NTN LLB) |
| C3 | radial internal clearance greater than Normal (common in motors) |
| C2 | radial internal clearance smaller than Normal |
| NR | snap ring groove in the outer ring, with snap ring |
| P6 / P5 / P4 | ISO precision classes (≈ ABEC 3 / 5 / 7) |