BenchReference

#35 Drill Bit

Decimal inches 0.1100″
Millimeters 2.794 mm
System Number (wire gauge)

Nearest equivalents in other systems

System Nearest drill Size Difference
Metric 2.8 mm 0.1102″ / 2.8 mm +0.006 mm (+0.0002″)
Fractional inch 7/64″ 0.1094″ / 2.778 mm −0.016 mm (−0.0006″)
Letter A 0.2340″ / 5.944 mm +3.15 mm (+0.1240″)
−0.224 mm+0.224 mm#35#37−0.152 mm#36−0.089 mm#34+0.025 mm#33+0.076 mm7/64″−0.016 mm2.8 mm+0.006 mmA +3.15 mm →tick position = true diameter · number neighbors above, equivalents below · window ±0.22 mm
Positive difference = cuts a slightly larger hole than #35. Sizes beyond the window are listed with arrows — they are not close substitutes.

Neighboring number sizes

Drill Decimal in mm vs #35
#37 0.1040 2.642 −0.152 mm
#36 0.1065 2.705 −0.089 mm
#35 0.1100 2.794 —
#34 0.1110 2.819 +0.025 mm
#33 0.1130 2.87 +0.076 mm
Data provenance. ASME B94.11M, Twist Drills (standard drill size series) (ASME). Millimeter and inch values are converted with the exact definition 1 in = 25.4 mm; the canonical dimension for this number size is 0.1100″. See all data sources.