BenchReference / Drill sizes / 8.1 mm 8.1 mm Drill Decimal inches 0.3189″
Millimeters 8.1 mm
System Metric
Nearest equivalents in other systems System Nearest drill Size Difference Fractional inch 5/16″ 0.3125″ / 7.938 mm −0.162 mm (−0.0064″)
Number (wire gauge) #1 0.2280″ / 5.791 mm −2.309 mm (−0.0909″)
Letter O 0.3160″ / 8.026 mm −0.074 mm (−0.0029″)
−0.648 mm +0.648 mm 8.1 mm 7.9 mm −0.2 mm 8 mm −0.1 mm 8.2 mm +0.1 mm 8.3 mm +0.2 mm 5/16″ −0.162 mm O −0.074 mm ← #1 −2.309 mm tick position = true diameter · metric neighbors above, equivalents below · window ±0.65 mm
Positive difference = cuts a slightly larger hole than 8.1 mm. Sizes
beyond the window are listed with arrows — they are not close substitutes.
Neighboring metric sizes Drill Decimal in mm vs 8.1 mm 7.9 mm 0.3110 7.9 −0.2 mm 8 mm 0.3150 8 −0.1 mm 8.1 mm 0.3189 8.1 — 8.2 mm 0.3228 8.2 +0.1 mm 8.3 mm 0.3268 8.3 +0.2 mm
← 8 mm (smaller) 8.2 mm (larger) →
Compare 8.1 mm with another size
Data provenance. ASME B94.11M, Twist Drills (standard drill size series) (ASME). Millimeter and inch values are converted with the exact definition 1 in = 25.4 mm; the canonical dimension for this metric size is 8.1 mm. See all data sources .